3-HYDRO Open-channel

  |   By  |  0 Comments

3-HYDRO Open-channel grinder Industrial

Featuring two rows of low-speed, high-torque grinders and a 5-HP standard motor, our powerful 3-HYDRO Open-channel unit can easily shred tough solids like drill cuttings and seafood waste that would otherwise damage downstream equipment and potentially cause costly sewage line clogs. It’s also well-suited for low and high-flow applications, as it can handle flow rates up to 5,620 GPM. The 3-HYDRO is also compact, making it a perfect fit for most wastewater channels. It has many optional features, including customizable steel guide frames for easy installation, Wipes Ready® Cutter Technology, and immersible motors.

Continue reading...

4-HYDRO Open-channel

  |   By  |  0 Comments

4-HYDRO Open-channel grinder Industrial

Enjoy more power with the 4-HYDRO Open-channel grinder, featuring a standard 10-HP motor. This compact grinder was designed for large sludge processing systems and high flows up to 2,100 GPM. With its dual-shafted, low-speed, high-torque grinders, the 4-HYDRO can also cut challenging solids down to size and effectively precondition sludges, slurries, and waste materials. It has many optional features, including custom installation guide frames, multiple cutter configurations, and immersible motors.

Continue reading...

Auger Monster & In-channel Auger Screens

  |   By  |  0 Comments

Auger Monster and In-channel Auger Screens Industrial

Our industrial Auger Monster® features our powerful Monster HYDRO grinder to reduce challenging solids. Additional design features include a fine perforated screening trough for solids entrapment, a rotating auger for solids removal, dual wash zones that clean the screenings, and reduce odors. It also comes with an optional compactor that dewaters the discharge, a cold weather system, or a discharge bagger. The Auger Monster® is capable of managing flows up to 4 MGD and is designed to fit channels as small as 12 inches wide.

Continue reading...

Auger Presses

  |   By  |  0 Comments

Auger Presses

Our range of auger presses includes the PLB (push-type) and PLT (pull-type). The PLB units come in 6-, 9-, and 12-inch diameters, with a capacity of up to 5 yd3/hr of wet solids. The PLT units are also available in multiple diameters (8 to 16 inches) and can handle up to 12 yd3/hr of wet solids.

Continue reading...

Dewatering Press

  |   By  |  0 Comments

Dewatering Press

Reduce transportation costs with JWC Environmental’s PPS Dewatering Press. It’s designed to squeeze water from discharge to reduce its size and volume, which not only helps reduce costs but also helps operators meet EPA landfill paint filter test requirements. The dewatering press is constructed with 304 stainless steel to handle acidic wastewater and features a shaft-mounted TEFC washdown-duty gear drive motor, removable access panels, and adjustable pressure plate and pneumatic controls. It’s also available in multiple diameters based on application requirements and can handle up to 14 yd3/hr of wet solids.

Continue reading...

Drainage and Non-drainage Conveyors

  |   By  |  0 Comments

Drainage and Non-drainage Conveyors

JWC Environmental provides a range of fully enclosed, CEMA 300-compliant USB/UST (shafted) conveyors, suitable for both drainage and non-drainage applications. These conveyors, available in various diameters and customizable lengths, are corrosion-resistant and capable of handling acidic wastewater. They are equipped with a shaft-mounted TEFC motor and gearbox suitable for washdown duties and include inspection ports for easier maintenance. Depending on the chosen model, these conveyors can process between 1 and 16 yd3/hr of wet solids.

Continue reading...

Externally Fed Rotary Drum Screens

  |   By  |  0 Comments

Externally Fed Rotary Drum Screens

Our self-cleaning wedge wire screen is an ideal option for scum applications or any industrial wastewater processes burdened with heavy oil or grease contents. It guarantees complete overflow protection for flows up to 5 MGD and is engineered to enhance material recovery for recycling purposes. They are also available in various diameters and lengths.

Continue reading...

Heavy Object Trap

  |   By  |  0 Comments

Heavy Object Trap

Easily precondition rocks, rags, silverware, and other challenging debris in FOG applications with the Heavy Object Trap. This unit can be integrated with our Honey Monster, which uses our 3-HYDRO-IX grinder to homogenize liquid grease into an easy-to-pump slurry. The Heavy Object Trap is available in three basket capacity sizes for use in 4-inch and 6-inch pipelines, can handle flow rates up to 600 GPM, and comes with various optional features, including a flow meter or plug valve.

Continue reading...

Honey Monster

  |   By  |  0 Comments

Honey Monster Industrial

Use our Honey Monster to process septage, grease, fats, oils, and sludge effortlessly. This fully enclosed, automated system performs four key operations: grinding, solids extraction, washing, and dewatering, which effectively reduces solids volume and diminishes odors. It can be equipped with the Heavy Object Trap to pre-screen rocks and metals and a MonsterTrack system for enhanced data recording capabilities.

Continue reading...